Keith Crews Cardinal 141 Years Strong

Since 1977 we have built a strong reputation for excellent installation and service work in the weighing industry. Pioneer has grown on this reputation due to the fact that we pay detailed attention and never instead of cutting corners. 

About Us

3 Service Locations and our Corporate Headquaters

Pioneer Scale has our Corporate Headquarters in the Heart of Benton and three convenient service locations with a large team of licensed technicians serving the Arkansas, Mississippi, Lousiana, Oklahoma, Missouri, Texas and New Mexico areas.

Benton, AR
Grand Prairie, TX

Texarkana, TX
Corporate Headquarters

Keith Crews Cardinal 141 Years Strong

Since 1977 we have built a strong reputation for excellent installation and service work in the weighing industry. Pioneer has grown on this reputation due to the fact that we pay detailed attention and never instead of cutting corners. 

About Us

Keith Crews Cardinal 141 Years Strong

Since 1977 we have built a strong reputation for excellent installation and service work in the weighing industry. Pioneer has grown on this reputation due to the fact that we pay detailed attention and never instead of cutting corners. 

About Us

People-Backed Products

Pioneer Scale is committed to offer good quality products to our customers.  The manufactures we choose to work with have the same ideals and quality requirements that we stand behind.  You will find a variety  of products that are economical and well built to suit your weighing needs.

View All Products

Magnets
  • Inspect and verify load carrying capacity of all magnet assemblies located in facility.
  • Inspect all devices, lifts, beams and hoist to insure that they are in good repair and appear to be safe. Check for frayed cables, missing bolts…. etc.
  • Determine capacity using the manufacturer’s serial and model plate located on the magnet. If one is not available, then use the hoist’s capacity or the beams capacity for documentation and testing.
  • Position test load equal to 150% of verified capacity 6” from floor and hold in position for no less than 5 minutes without failure.
  • If device sustains load position for five minutes and passes inspection affix serial tag with current year in a place as to not hinder operation and in a location at to be clearly identified upon later inspection. 
  • Complete PDF fillable form certificate for magnet.